Frequently Asked Questions

Answers that will cover all your questions

General

Our company specializes in the manufacture of high quality and aesthetic corporate logos for the benefit of its customers.

You can contact us by phone or email to discuss your needs and provide you with more information about the ordering process.

Nameplates

Transcripts nameplates are extremely fine characters and symbols made of real metal, manufactured by the high-tech process of “Electroforming”. These nameplates offer unexpectedly detailed features that no other technology can achieve, and are available in a wide range of colours, making Transcript A.T. product marking unsurpassed and unique.

Technical Features

Material & Thickness

Nickel – for flat surfaces
Copper – for curved surfaces
approx. 0.04 mm = Standard thickness
approx. 0,10 mm = Intense thickness
Edit

Gold plating (real gold)
Chrome plating
Brushed texture
Matt
Glossy
Silkscreen
Colours
PVD coatings
Tone-on-tone effect
Fixing

Exclusive nameplates
With suitable adhesive according to requirements
Equipped with adhesive on the reverse side
Transfer to the surface using a conveyor belt

Use

Transcripts nameplates are mainly used on rigid and smooth surfaces. They can be combined with other materials such as acrylic, metal, membrane and glass to give a special aesthetic and communicate the value of the product.

Polyurethane nameplates are flexible and resistant to extreme conditions and provide a three-dimensional appearance to the finished product.

Polyester and PVC nameplates belong to two different categories of materials. Polyester is more resistant to UV rays and corrosion, while PVC is more flexible and resistant to moisture. The choice between them depends on the requirements of the application and the environment in which they will be used.

Nameplates

Transcripts nameplates are extremely fine characters and symbols made of real metal, manufactured by the high-tech process of “Electroforming”. These nameplates offer unexpectedly detailed features that no other technology can achieve, and are available in a wide range of colours, making Transcript A.T. product marking unsurpassed and unique.

Technical Features

Material & Thickness

Nickel – for flat surfaces
Copper – for curved surfaces
approx. 0.04 mm = Standard thickness
approx. 0,10 mm = Intense thickness
Edit

Gold plating (real gold)
Chrome plating
Brushed texture
Matt
Glossy
Silkscreen
Colours
Gold
Paladium
Placement

Exclusive nameplates
With standard adhesive or S5 or S9 depending on the surface
Equipped with adhesive on the back side
With clear transfer tape for easy installation.
Use

Transcripts nameplates are mainly used on rigid and smooth surfaces. After removing the light blue silicone paper, stick the transparent transfer tape with the letters on the desired surface (if clean and dry), press down enough with your finger or roller to adhere the letters, then peel off the transparent transfer tape from the top right corner to the bottom left and parallel to the letters.

Tip

It is recommended to clean the surface with ISOPROPYL ALCOHOL (2-PROPANOL) alcohol beforehand, which greatly enhances the adhesion and can be obtained from any pharmacy.

Polyurethane nameplates are flexible and resistant to extreme conditions and provide a three-dimensional appearance to the finished product.

Polyester and PVC nameplates belong to two different categories of materials. Polyester is more resistant to UV rays and corrosion, while PVC is more flexible and resistant to moisture. The choice between them depends on the requirements of the application and the environment in which they will be used.